• November 17, 2019, 11:15:39 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: Avaya Switch 8010 configuration  (Read 2306 times)

0 Members and 1 Guest are viewing this topic.

Offline mmuthu2019

  • Rookie
  • **
  • Posts: 1
Avaya Switch 8010 configuration
« on: June 07, 2019, 09:07:45 AM »
Hi Everyone,

i'm from the cisco , hpe back ground. I'm new to Avaya switch i dont understand most of the commands on avaya how and why this is configured. would be great if one of you can help me explain what does it mean exactly? even if you know any one line of these below configuration please do update me.

# PORT CONFIGURATION - PHASE I

ethernet 1/2 perform-tagging enable


# STG CONFIGURATION

stg 1 add ports 1/1,1/12,2/1,2/12,3/12,4/11-4/12
stg 1 priority 4000
# PORT CONFIGURATION - PHASE II

ethernet 1/1 untagged-frames-discard enable
ethernet 1/1 default-vlan-id 4200
ethernet 1/1 cp-limit disable multicast-limit 2500 broadcast-limit 5000
ethernet 1/1 enable-diffserv true
ethernet 1/1 name "ERS"
ethernet 1/1 stg 1 stp disable
ethernet 1/1 vlacp macaddress xx:xx:xx:xx:xx
ethernet 1/1 vlacp enable
ethernet 1/1 vlacp slow-periodic-time 10000
ethernet 1/2 default-vlan-id 19
ethernet 1/2 cp-limit enable multicast-limit 2500 broadcast-limit 5000
ethernet 1/2 access-diffserv true
ethernet 1/2 enable-diffserv true
ethernet 1/2 name "WS
ethernet 1/2 stg 1 stp disable
ethernet 1/2 smlt 200 create



vlan 21 ip pim enable
vlan 21 ip ospf interface-type passive
vlan 21 ip ospf enable
vlan 21 ip rsmlt enable
vlan 21 ip rsmlt holdup-timer 9000




# R-MODULE FILTER CONFIGURATION

filter act 1 create name "Source_IP_Set"
filter act 1 ip srcIp
filter act 1 apply
filter act 2 create name "WLAN_Time"
filter act 2 ip srcIp,dstIp
filter act 2 protocol tcpSrcPort,udpSrcPort,tcpDstPort,udpDstPort
filter act 2 arp operation
filter act 2 apply
filter act 3 create name "For_P"
filter act 3 ip srcIp,dstIp,ipProtoType
filter act 3 protocol tcpDstPort,udpDstPort
filter act 3 arp operation
filter act 3 apply
filter acl 1 create inPort act 1 name "WLAN_VoIP"
filter acl 1 port add 1/2,2/2,3/2,4/2
filter acl 1 ace 1 create name "WLAN_VoIP"
filter acl 1 ace 1 action permit remark-dscp phbef egress-queue 6,62,62 egress-queue-nnsc premium
filter acl 1 ace 1 ip src-ip eq x.x.x.1-x.x.x.2
filter acl 1 ace 1 enable

Thanks