• November 26, 2020, 08:03:35 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: UEFI Boot  (Read 4204 times)

0 Members and 1 Guest are viewing this topic.

Offline bwilliams2

  • Full Member
  • ***
  • Posts: 58
UEFI Boot
« on: October 31, 2014, 11:59:18 AM »
http://support.microsoft.com/kb/2602043

Based on the article above I have been asked to configure IP helper table entries. I am running 8600 routers.

Has anyone used this type of config?

Quote
If you have a mix of UEFI and Legacy BIOS machines you cannot use DHCP Scope Options to direct PXE clients to the Boot Program on the WDS server. You must use IP Helper Table Entries. For more information on configuring IP helper table entries contact your router/switch manufacturer.


Offline Michael McNamara

  • Administrator
  • Hero Member
  • *****
  • Posts: 3842
    • michaelfmcnamara
    • Michael McNamara
Re: UEFI Boot
« Reply #1 on: November 01, 2014, 08:09:19 AM »
Yes, just add a DHCP relay for that subnet pointing to your PXE server... this is how Altiris (and others) work.
We've been helping network engineers, system administrators and technology professionals since June 2009.
If you've found this site useful or helpful, please help me spread the word. Link to us in your blog or homepage - Thanks!

Offline bwilliams2

  • Full Member
  • ***
  • Posts: 58
Re: UEFI Boot
« Reply #2 on: November 01, 2014, 10:08:40 AM »
Thank you for your reply Michael. So for any given subnet I would have my "normal" DHCP relay and then an additional DHCP relay for the UEFI machines?

Offline Telair

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 965
Re: UEFI Boot
« Reply #3 on: November 01, 2014, 10:43:18 PM »
Yes, you need a DHCP relay setup to point to your DHCP server(s) on each subnet as well as to the PXE boot server(s).