• November 29, 2020, 05:54:36 PM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: Storm-Control on ERS 4000 v5.8  (Read 2141 times)

0 Members and 2 Guests are viewing this topic.

Offline Théo

  • Jr. Member
  • **
  • Posts: 34
Storm-Control on ERS 4000 v5.8
« on: July 22, 2014, 02:54:44 AM »
Hi Guys,

Is someone is using the new storm-control fonctionality on Software 5.8 ?
I'm looking for information about recommanded values for watermark (high and low), i don't found any documentation on this.

FYI : Storm-Control (unicast, multicast and broadcast) is a "new" loop protection tool. It detect broadcast / multicast / unicast band utilization. You can configure high threshold (high waterto start drop or shutdown the physical port. Also, you can configure a low threshold (low watermark) to stop the drop process.


ACIS 6103 - ACSS 3605

Offline Dominik

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1564
    • Networkautobahn
Re: Storm-Control on ERS 4000 v5.8
« Reply #1 on: July 22, 2014, 10:05:36 AM »
This really depends on the avarage traffic in your network.
The watermarks are completly different when you have a small network e.g. with 3 switches to an super large network with 1000+ devices.
It´s always the networks fault!