• October 29, 2020, 10:31:08 PM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: SNMP tool and config example for ERS 4000/5000 series  (Read 4673 times)

0 Members and 1 Guest are viewing this topic.

Offline fabb

  • Rookie
  • **
  • Posts: 13
SNMP tool and config example for ERS 4000/5000 series
« on: July 08, 2015, 12:10:31 PM »
Hi all,

I've checked in the forum for answers about SNMP configuration and examples but i must admit that i'm a little confuse with all the information. To explain,  in my case i've a syslog  and the config is good on the ERS so i want the opportunity to go further with SNMP. What tool do you use in general ( i' don't have EDM, i use DM) and i have fan centreon. I have also the defaut public/private community even if i have specified the ro/rw community. An other thing is the mention "Can't open trap port:Adress Already in use...

Sorry for all questions thanks for all yours lights.


Offline Roberx

  • Rookie
  • **
  • Posts: 23
Re: SNMP tool and config example for ERS 4000/5000 series
« Reply #1 on: July 09, 2015, 05:18:39 PM »
fabb-

Are you asking for ACLI examples?

Offline fabb

  • Rookie
  • **
  • Posts: 13
Re: SNMP tool and config example for ERS 4000/5000 series
« Reply #2 on: July 10, 2015, 10:27:35 AM »
Hi Roberx,

Yes for me i' just want to send SNMP traps to a remote server. If i don't mistake i have just to configure the snmp trap receiver to my server and a v2/v3 community?

Thanks you

Offline Roberx

  • Rookie
  • **
  • Posts: 23
Re: SNMP tool and config example for ERS 4000/5000 series
« Reply #3 on: July 16, 2015, 11:09:03 AM »
Fabb-

Try:
snmp-server authentication-trap disable
snmp-server community ROString ro
snmp-server community RWString rw
snmp-server host X.X.X.X rostring

Lat me know if you have anymore questions!

Offline ajohnson

  • Jr. Member
  • **
  • Posts: 43
Re: SNMP tool and config example for ERS 4000/5000 series
« Reply #4 on: July 16, 2015, 06:01:37 PM »
For a SNMP tool, I like the iReasoning MiB browser, personal edition.   It also comes with a Trap receiver and sender, although I've not used them.   Just google it.

Offline fabb

  • Rookie
  • **
  • Posts: 13
Re: SNMP tool and config example for ERS 4000/5000 series
« Reply #5 on: July 18, 2015, 06:24:00 AM »
Robertx,

Thanks i was in the good way belong your example. Just one question why disable authentication trap?

Thanks

Offline Roberx

  • Rookie
  • **
  • Posts: 23
Re: SNMP tool and config example for ERS 4000/5000 series
« Reply #6 on: July 18, 2015, 09:43:45 AM »
fabb-

You can enable it if you need Enable authentication traps.

Offline fabb

  • Rookie
  • **
  • Posts: 13
Re: SNMP tool and config example for ERS 4000/5000 series
« Reply #7 on: August 17, 2015, 08:27:59 AM »
Thanks again!