Hello,
I have a cluster of 4 X 5698TFD-PWR and another cluster of 2x5952GTS-PWR. All the routing is perform into the 5698TFD cluster for the Vlan. Both cluster are connected using 2 X 10 gig fiber link. When I assign a Vlan on a port on the 5952GTS switch I loose about 60% of speed when I transfer a file. If I leave the default vlan 1 on the 5952GTS for the same port the speed is just fine and I don`t have any slowness. I do not have any error or discard packet telling me it`s not the Issues. Any ideal what could cause this slowness ?
Ps. Both port on the fiber side are on Trunk mode and the Vlan is assign to it
Thanks
