• September 19, 2020, 06:31:06 PM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: Question regarding 8648R locking up  (Read 2102 times)

0 Members and 1 Guest are viewing this topic.

Offline Imran ta

  • Rookie
  • **
  • Posts: 4
Question regarding 8648R locking up
« on: May 25, 2013, 11:04:41 PM »
Hi all experts,

I have problem with my 8600 (5.1.5.1 release), it was working fine but suddenly it locked up and everything was flashing, when i rebooted all came up except slot 7 (i/o module 8648 R).

I am suprised why all of sudden it happen, after reseating the blade 7 it finally came.
Do anyone had gone thorugh same kind of stuff, is it a release problem ? because i am not seeing any hi traffic load of muticast /braodcast from last weeks......
« Last Edit: May 26, 2013, 06:30:47 PM by Michael McNamara »


Offline Michael McNamara

  • Administrator
  • Hero Member
  • *****
  • Posts: 3842
    • michaelfmcnamara
    • Michael McNamara
Re: Question regarding 8648R locking up
« Reply #1 on: May 26, 2013, 06:32:45 PM »
I've split your question out into a new thread... your post has little to-do with the previous thread you posted in.

The COP will occasionally fail to load/boot properly... you are running some old software, you might benefit from upgrading to 5.1.8.x or if you haven't had this problem too often you might be fine leaving well enough alone.

Good Luck!
We've been helping network engineers, system administrators and technology professionals since June 2009.
If you've found this site useful or helpful, please help me spread the word. Link to us in your blog or homepage - Thanks!

Offline Imran ta

  • Rookie
  • **
  • Posts: 4
Re: Question regarding 8648R locking up
« Reply #2 on: November 03, 2013, 01:02:34 AM »
Thanks Michael,

it is long time, but i could see, now its working, that was a one time stuff, and offcourse i m on 5.1.8 now....every thing is good.

Thanks for your look up.