• October 31, 2020, 02:57:19 PM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: Problems with managing switches after upgrading to 48xx from 5520/5510's.  (Read 1392 times)

0 Members and 1 Guest are viewing this topic.

Offline DustiK

  • Rookie
  • **
  • Posts: 1
We recently upgraded almost all of our 5520/5510 switches to 4826/4850's.  Since we did this we have had problems with COM and discoveries.  When we do discoveries we can either manage all switches or have 3-15 that are not manageable (orange).  If we do another discovery the previous orange ones are now blue and different switches come up orange.

I tried to change the SNMP timeout and we haven't lost quite as many at any one time but still lose some on a few discoveries.  Any ideas on what else we could change that we can manage all of our switches.

We have also had it happen where you are in a switch in COM making changes and then it will stop responding.  If you do a discovery then it will show up "orange", until we do another discovery.

We are using FW:   SW:v5.8.3.017 BN:17.