• September 22, 2020, 11:32:39 PM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: Nortel baystack 5510 configuration  (Read 4994 times)

0 Members and 1 Guest are viewing this topic.

Offline poiex

  • Rookie
  • **
  • Posts: 5
Nortel baystack 5510 configuration
« on: November 09, 2014, 02:39:39 PM »
Hi i'm trying to config my Ethernet Routing Switch 5510-48T HW:03 FW:6.0.0.18  SW:v6.3.3.041 BN:41.

I did find the instructions how to make settings on blog.michaelfmcnamara.com/2011/01/vlans-ip-routing-ethernet-routing-switch/

I got the vlans 100 and 200 made, but problem is that i cant get my internet connection to work trough those ports,
the 1-12 ports works fine pc:s get their ip addresses, should i use more than one dhcp server for the 100 and 200 vlans?

My router is huawei B593s-22 LTE modem.



Offline krc

  • Rookie
  • **
  • Posts: 15
Re: Nortel baystack 5510 configuration
« Reply #1 on: November 10, 2014, 03:47:50 PM »
If your routing and the DHCP server is on another network, then you need to configure "DHCP-relay" (some call this the dhcp helper address) to the the destination of you DHCP server and of course have a scope setup for the that network.

Offline poiex

  • Rookie
  • **
  • Posts: 5
Re: Nortel baystack 5510 configuration
« Reply #2 on: November 10, 2014, 04:16:00 PM »
Thats the problem how do i make the dhcp relay with nortel or do i make it with my huawei router?
my router is in 192.168.1.1 and those two vlans are 192.168.100.1 and 192.168.200.1.

How does my router know, how to give ip address to vlan100 and vlan200 networks, if it has its own ip in 192.168.1.1?
 
I have another 3g connection with its own router at 192.168.0.1 should it work with one vlan and
give the addresses to that network, and i still be able browse other pc's in different vlans?

My goal is to connect the two routers in one network so i could manage my servers,routers and fileshares with all of my computers.

Offline krc

  • Rookie
  • **
  • Posts: 15
Re: Nortel baystack 5510 configuration
« Reply #3 on: November 10, 2014, 04:22:33 PM »
Who ever is the router for a network is the one who relay's the DHCP discovery (request) on behalf of the client to the DHCP server, and the DHCP server will know what scope to use by matching the source address (network) from where the request came from.

Offline TankII

  • Hero Member
  • *****
  • Posts: 556
Re: Nortel baystack 5510 configuration
« Reply #4 on: November 11, 2014, 10:42:11 AM »
Is IP routing enabled?
If so, can the router service more than one DHCP scope?

Offline poiex

  • Rookie
  • **
  • Posts: 5
Re: Nortel baystack 5510 configuration
« Reply #5 on: November 20, 2014, 11:18:04 AM »
Yes the ip routing is enabled but i think the huawei router doesnt know how to handle multiple scopes,
Atleast i havent found any settings for that.

Could it work so that if i plug two network cables to router and then those to corresponding vlan's in nortel, router then offers different addresses.





Offline TankII

  • Hero Member
  • *****
  • Posts: 556
Re: Nortel baystack 5510 configuration
« Reply #6 on: November 21, 2014, 11:20:14 AM »
You could build a DMZ with it's own DNS/DHCP for the second network as an option.
If you have a true SOHO router like Netgear  FV336GV2, you can then assign VLANS with their own IP's on the LAN ports.

TankII

Offline Dojs

  • Full Member
  • ***
  • Posts: 80
    • http://br.linkedin.com/pub/fernando-camargo-filho/53/3a2/ba2/
Re: Nortel baystack 5510 configuration
« Reply #7 on: November 24, 2014, 02:04:04 PM »
poeix,

 try this. Create one VLAN to your Router (Huawei) with the same Network IP of it. Configure the default route to it (Huawei).
 Each VLAN need have an IP to be the gateway 192.168.100.1 (100) 192.168.200.1 (200)

 I believe that it will make both vlans work to internet. But remeber that each vlan need a DHCP Relay, so each a server to do it.

Offline poiex

  • Rookie
  • **
  • Posts: 5
Re: Nortel baystack 5510 configuration
« Reply #8 on: November 24, 2014, 02:27:26 PM »
If i got it right i need separate dhcp relay server on both vlan networks,
and the router (huawei) in its very own vlan so after that i got 3 separate vlans?

vlan1 huawei router
vlan100 with dhcp relay server
vlan200 with dhcp relay server

Offline Dojs

  • Full Member
  • ***
  • Posts: 80
    • http://br.linkedin.com/pub/fernando-camargo-filho/53/3a2/ba2/
Re: Nortel baystack 5510 configuration
« Reply #9 on: November 25, 2014, 06:20:10 AM »
Poiex,

 you can use the same DHCP Server to any VLANs. But you need insert in each the ID of VLAN to dont have trouble in DHCP Server.
When you dont need a DHCP dont use it in VLAN, and dont will have trouble.