• November 14, 2018, 09:15:53 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: LACP configuration VSP 7024 --> HPE 6125XLG Blade switch  (Read 215 times)

0 Members and 1 Guest are viewing this topic.

Offline pat2012

  • Sr. Member
  • ****
  • Posts: 150
LACP configuration VSP 7024 --> HPE 6125XLG Blade switch
« on: August 21, 2018, 09:39:13 AM »
Hi folks.

I have a VSP 7024 stack that I want to connect to 2 HPE 6125XLG blade switches in an HP blade chassis.  First I have to figure out how to create an IRF between the 2 HP blade switches so appear as 1 switch.  That's an HP specific challenge.  The next challenge is to create an LACP link between the VSP and the HPE.

I've been going through HP's documentation that I could get my hands on.  I've never used HP switches before so it is a bit confusing.  LACP on the VSP is pretty simple, but on the HPE.....  I'm lost.  So many options I don't understand.

Does anyone have experience in creating an LACP trunk on HP and connecting it to an Avaya/Extreme switch?

Thanks for any tips/tricks you may have.   ;D


Offline Řyvind Nikolaisen

  • Full Member
  • ***
  • Posts: 52
Re: LACP configuration VSP 7024 --> HPE 6125XLG Blade switch
« Reply #1 on: September 03, 2018, 07:39:15 AM »
I've never worked with these models of blade switches, but I've noticed that they to have SPB support. Have you looked for that in the documentation? It might be the easy way around the LACP problem...
Best regards,

Řyvind Nikolaisen
Senior Network Architect
NetNordic Communications AS
Avaya ACE Fx #204