• November 26, 2020, 03:57:16 PM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: IP FLOW Manager from UCM  (Read 2242 times)

0 Members and 1 Guest are viewing this topic.

Offline Paul L

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 755
    • paulaleroux
    • Paul's Networking blog
IP FLOW Manager from UCM
« on: February 05, 2014, 09:54:33 AM »
Does anyone have any experience using IP FLOW Manager.
is it any good?
ACSS- Avaya Enterprise Routing Switch  #8


Offline Théo

  • Jr. Member
  • **
  • Posts: 34
Re: IP FLOW Manager from UCM
« Reply #1 on: February 06, 2014, 07:58:48 AM »
Hi Paul,

I install / configure / use few times IPFM 2.0.1 and 2.0.2.
first, it's design for ERS 8000 or VSP 9000, not for ERS 5000 or less because the sampling rate are ligth on them. But it works. You can make day/week/month report, etc..
I tried to use remote pcap capture but i never success. It need a second CPU module in standy (not supported in HA) and a secondary interface on the IPFM server connected to the slave mgmt port (L2 link). but even with that, it not work for me.
finaly, this is a small tool that can give a little visualization of network applications, make report, send mail,etc.. .
But i'm not sure about the benefit of this application. I think there are other better tools.

I you have particular question, you welcome ;)

Théo
ACIS 6103 - ACSS 3605