• August 19, 2019, 11:12:46 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: HW WARNING chSeepromSlotInfoInit: Slot 4 Seeprom Read failed.  (Read 671 times)

0 Members and 1 Guest are viewing this topic.

Offline john walker

  • Rookie
  • **
  • Posts: 4
Hi on nortel 8006 i tried to install the 8630 GBR card but is giving error  HW WARNING chSeepromSlotInfoInit: Slot 4 Seeprom Read failed.

i have tried it all four slots and even try with new card but still the same issue
please help on this urgently


Offline TankII

  • Hero Member
  • *****
  • Posts: 556
Re: HW WARNING chSeepromSlotInfoInit: Slot 4 Seeprom Read failed.
« Reply #1 on: February 12, 2019, 12:52:51 PM »
What version of code are you running on this chassis?

Any other 8630 blades running on it?
Do you see any socket issues in the back of the chassis where maybe a pin bent and crossed in the past?

Offline Paul L

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 754
    • paulaleroux
    • Paul's Networking blog
Re: HW WARNING chSeepromSlotInfoInit: Slot 4 Seeprom Read failed.
« Reply #2 on: February 22, 2019, 03:46:00 PM »
This is a backplane issue on the Chassis or Power supplies.  I would make a ticket twitch Extreme GTAC>

The seeprom error was common if you had the dual input PSUs. But it can be caused be several issues, most have been solved in software upgrades.

https://downloads.avaya.com/css/P8/documents/100172275

recommend upgrading the switch to the last version.  7.2.26.X
Reseeding the PSUs.

ACSS- Avaya Enterprise Routing Switch  #8