• September 18, 2020, 03:59:02 PM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: Ext CP Limit details questions  (Read 1790 times)

0 Members and 1 Guest are viewing this topic.

Offline oldNortelguy

  • Jr. Member
  • **
  • Posts: 33
Ext CP Limit details questions
« on: December 19, 2014, 11:03:44 AM »
1. Is Ext CP Limit specifically just triggered by the % utilization of the interface?
2. Is is simply a % of utilization of the said interface that triggers it based on the setting?
3. If you set the port action to "softdown" does that mean it wont show down on config or red in JDM and will also "self heal" when the traffic lets up?
4. I assume Hard down is latched, disabled/ down port?
5. Lastly, you can enable the setting per port. Are any of those setting functional if you do not enable Ext CP limit globally at the Edit, Chassis level?


Offline Michael McNamara

  • Administrator
  • Hero Member
  • *****
  • Posts: 3842
    • michaelfmcnamara
    • Michael McNamara
Re: Ext CP Limit details questions
« Reply #1 on: December 28, 2014, 10:19:17 AM »
There are some very detailed guides available from Avaya (formerly Nortel) that answer most of those questions.

I would suggest you start with this one;

https://downloads.avaya.com/css/P8/documents/100123838

Good Luck!
We've been helping network engineers, system administrators and technology professionals since June 2009.
If you've found this site useful or helpful, please help me spread the word. Link to us in your blog or homepage - Thanks!