• September 26, 2020, 06:39:41 PM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: ERS 5510 v6.2.5.027 : How to check status of RPS by CLI  (Read 1956 times)

0 Members and 1 Guest are viewing this topic.

Offline nashim

  • Rookie
  • **
  • Posts: 9
ERS 5510 v6.2.5.027 : How to check status of RPS by CLI
« on: September 11, 2013, 10:29:59 AM »
One of my customer have a stack of 2 switch : ERS 5520 & 5510. In output of show tech:
In 5520, -Power Status:         Primary and Redundant Power
In 5510 - Power Status:         Primary Power, although RPS is connected to 5510 and working.

customer wants to know why RPS is not displaying in 5510, and Is there any command to see it.


Offline Telair

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 965
Re: ERS 5510 v6.2.5.027 : How to check status of RPS by CLI
« Reply #1 on: September 11, 2013, 04:54:18 PM »
If you use EDM to view the switch, it shows under the tabs:
Edit -> Chassis -> Environment -> PowerSupply

My 5510 with no secondary power supply says:

Unit 1 Power Supply 1: Primary Power Supply
OperState: normal
Unit 1 Power Supply 2: Redundant Power Supply
OperState: removed