• September 21, 2020, 09:16:34 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: EAP Fail Open Voice Vlan, Fail Open VLAN, Continuity Mode  (Read 1647 times)

0 Members and 1 Guest are viewing this topic.

Offline byte-runner

  • Rookie
  • **
  • Posts: 1
EAP Fail Open Voice Vlan, Fail Open VLAN, Continuity Mode
« on: March 26, 2015, 02:52:55 PM »
Hello Forum!

Does anyone know how to configure the "Fail Open Voice Vlan"?

For an EAP or non-EAP enabled port, by default, the Fail Open VLAN feature is disabled. When the
RADIUS servers are unreachable, if the Fail Open VLAN is defined, then
the port becomes a member of both the EAP Fail Open VLAN and EAP Fail Open VoIP VLAN
the switch sets the PVID of the switch port to EAP Fail Open VLAN
all the EAP-enabled ports move to the Fail Open VLANs across the units in a stack

Configuring Security on Avaya Ethernet Routing Switch 4000 Series
Release 5.8, NN47205-505, Issue 10.02, February 2015, Page 47

Any hints are welcome.
byte-runner