• October 31, 2020, 05:49:26 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: Device Manager on 8010 Chassis  (Read 2908 times)

0 Members and 1 Guest are viewing this topic.

Offline wepaul

  • Rookie
  • **
  • Posts: 5
Device Manager on 8010 Chassis
« on: September 11, 2014, 09:44:11 AM »
Hello All,
              I need some help enabling Java Device Manager for remote configuration.. I have struggled with this for months and currently use CLI to configure new services which is not as easy as JDM..

*********************************************
* Copyright (c) 2006 Nortel, Inc.           *
* All Rights Reserved                           *
* Passport 8010                                 *
* Software Release 4.0.6.0                  *
*********************************************
Thanks in advance !!!

Wendell


Offline Telair

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 965
Re: Device Manager on 8010 Chassis
« Reply #1 on: September 11, 2014, 06:40:11 PM »
JDM just interfaces with the device by using SNMP.  Make sure you have your SNMP read and read/write community strings set on your 8600 and a manageable interface to connect to.  The one your using for your CLI work should be just fine.  In JDM then set the read and write community strings to the same as your using on your 8600 and give it the IP address it should use to connect to it and it should all come up.

Offline wepaul

  • Rookie
  • **
  • Posts: 5
Re: Device Manager on 8010 Chassis
« Reply #2 on: September 11, 2014, 07:09:48 PM »
JDM just interfaces with the device by using SNMP.  Make sure you have your SNMP read and read/write community strings set on your 8600 and a manageable interface to connect to.  The one your using for your CLI work should be just fine.  In JDM then set the read and write community strings to the same as your using on your 8600 and give it the IP address it should use to connect to it and it should all come up.


Telair, would you happen to have the command line sample script to configure snmp on the 8600 ?

Offline Telair

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 965
Re: Device Manager on 8010 Chassis
« Reply #3 on: September 12, 2014, 12:25:55 PM »