• September 26, 2020, 06:37:13 PM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: Avaya Stack Telnet doesn't work  (Read 1892 times)

0 Members and 1 Guest are viewing this topic.

Offline dynamics

  • Rookie
  • **
  • Posts: 1
Avaya Stack Telnet doesn't work
« on: September 14, 2016, 02:26:42 AM »
Hello @all,
yesterday i had to configure an avaya stack.
First telnet worked without any problems but when I wanted to switch the lldp med-network-policies into another vlan the switch closed the session and the access via telnet doesn't work anymore.
Access via HTTP is still ok, I disabled and enabled remote access via telnet but without any success.
Is there any way to activate telnet again without rebooting?
Thanks a lot for your help

Offline Michael McNamara

  • Administrator
  • Hero Member
  • *****
  • Posts: 3842
    • michaelfmcnamara
    • Michael McNamara
Re: Avaya Stack Telnet doesn't work
« Reply #1 on: September 18, 2016, 08:28:05 AM »
You should check to make sure that the stack hasn't broken... if the stack breaks into a single switch the stack IP address will stop working.

We've been helping network engineers, system administrators and technology professionals since June 2009.
If you've found this site useful or helpful, please help me spread the word. Link to us in your blog or homepage - Thanks!