• February 24, 2018, 01:26:12 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: Avaya Ethernet Routing Switch 3500 Series. Vlan trunking problems  (Read 668 times)

0 Members and 1 Guest are viewing this topic.

Offline gerson2002

  • Rookie
  • **
  • Posts: 2
I need to connect one part of my clients network using this device. I have a fiber link to the core switch which is Cisco Small Business 300.
I already tested the link with the default vlan 1 and I can reach servers, internet etc.
The problem is when I change the ports to VLAN 3. If I try to ping those ports it doesnt work. I have VLAN 3 in my other switches and I dont have any issues. So I think maybe i did a misconfiguration in this switch. So any good guide on how to configure it VLAN and trunk ports in avaya switches? I need add route in this switch since is layer 3. But I dont think so. Since I am using just  1 ip for managment.The firewall is doind the routing between vlans

I dont find any guide on the internet maybe you have experience with avaya switches.


Offline MatzeKS

  • Sr. Member
  • ****
  • Posts: 272
    • matzeks
    • Controlware GmbH - Germany
Re: Avaya Ethernet Routing Switch 3500 Series. Vlan trunking problems
« Reply #1 on: July 11, 2016, 02:44:54 AM »
... here you will find a complete "Documentation Library" for free    ;)

http://support.avaya.com/css/P8/documents/101018076

Good luck
------------------------------------------------------
ACE-Fx #00050