• September 19, 2020, 09:44:28 PM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: avaya 8800 radius password fallback  (Read 4164 times)

0 Members and 1 Guest are viewing this topic.

Offline MeireleR

  • Rookie
  • **
  • Posts: 6
avaya 8800 radius password fallback
« on: August 26, 2013, 08:50:04 AM »
Hello

I've been reding this forum for a while, and it has been very helpful in many situations. Now I decided to participate, this is my first post.

This post is Due to a doubt in configuring avaya 8800 integration with radius-server.
I've configured the 8800 correctly and its performing radius authentication (web only).
The question is, what if the radius server becomes unavailable?

For 4000/5000 series there is the command "radius-server password fallback", but for 8800 I can't found it. Is it Done by default? I'm following ĞManagement Access Security for ERS 8800/8600 Technical Configuration Guideğ

Switch is a 8800 8895 SF/CP V7.2.0.2



Offline MatzeKS

  • Sr. Member
  • ****
  • Posts: 311
    • matzeks
    • Controlware GmbH - Germany
Re: avaya 8800 radius password fallback
« Reply #1 on: August 27, 2013, 03:29:52 AM »
Hello MeireleR, first welcome to the forums.

As far as I know "radius fallback" is enabled/set by default on the ERS-8k and VSP-9k.

I recommend to test that "feature" if it really works, I had some negative experiences in past (v5.x) regarding this.
So my "default way during maintenance windows" is to disable radius authentication globally before.

;)

Good luck 
------------------------------------------------------
ACE-Fx #00050

Offline MeireleR

  • Rookie
  • **
  • Posts: 6
Re: avaya 8800 radius password fallback
« Reply #2 on: August 27, 2013, 05:28:01 AM »
Thank you MatzeKS,

I'll test it for sure, I'm using radius authentication (in this testing phase) for web only to prevent unwanted situations.

Regards

Offline vincewood

  • Rookie
  • **
  • Posts: 5
Re: avaya 8800 radius password fallback
« Reply #3 on: November 05, 2013, 11:44:23 AM »
Hi!

When the fallback mode is active, you can use the local accounts.
You can have the local accounts setting information by typing the command:
# show cli password

then you got:
Access Login Username / Password
RW RW RW / ***************
RO RO RO / ***************


I tried on a brand new Avaya 3510GT and it works :)

I found this information in the Avaya download website.

I hope that could help you