• September 21, 2020, 11:42:09 PM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: ADAC and LLDP for Aastra Phones  (Read 3766 times)

0 Members and 1 Guest are viewing this topic.

Offline TonsOfSteel

  • Jr. Member
  • **
  • Posts: 38
ADAC and LLDP for Aastra Phones
« on: November 27, 2013, 09:49:44 AM »
ERS5500 with 6.2.5.27 code.
I have some Aastra VoIP phones we're adding to our infrastructure and I have configured ADAC with LLDP.
The strange thing is when I add a MAC range, adac mac-range-table low-end 00:08:5d:00:00:00 high-end 00:08:5d:ff:ff:ff that covers the Aastra's, the phone will not connect to the server. The minute I clear the range, no adac mac-range-table, the phones connect and are usable? #show lldp port 5 neighbor detail has all the information for the phone. 
config:
ADAC
adac voice-vlan 112
adac op-mode tagged-frames
adac uplink-port 1
no adac mac-range-table
adac mac-range-table low-end 00:08:5d:00:00:00 high-end 00:08:5d:ff:ff:ff

LLDP
inter fastEthernet 2-10
   vlan ports 2-10 filter-unregistered-frames disable
   lldp tx-tlv port-desc sys-cap sys-desc sys-name
   lldp status txandRx config-notification
   lldp tx-tlv med extendedPSE med-capabilities network-policy
   poe poe-priority high
   spanning-tree learning fast
   adac enable

Thanks in advance


Offline tashfeen1

  • Rookie
  • **
  • Posts: 10
Re: ADAC and LLDP for Aastra Phones
« Reply #1 on: December 12, 2013, 01:10:20 AM »
Hi ,

I need some help with configuring lldp on Avaya switch. i noticed you configure LLDP before. would you mind sharing the lldp sample config.

Thanks in advance.

Tash.

Offline TonsOfSteel

  • Jr. Member
  • **
  • Posts: 38
Re: ADAC and LLDP for Aastra Phones
« Reply #2 on: December 12, 2013, 02:01:37 PM »
Hi Tash,

The configuration I used in the post above was taken from Michael McNamara's blog found here:

http://blog.michaelfmcnamara.com/2007/10/nortel-ers-5520-pwr-switch/

You can read more about LLDP by downloading NN47200-500_06.02_Configuration_System from Avaya's website.

Offline Da_fourby

  • Rookie
  • **
  • Posts: 17
Re: ADAC and LLDP for Aastra Phones
« Reply #3 on: December 13, 2013, 08:05:30 AM »
A simple config for lldp on 4500 series
no adac and stack of 3 units:

!
! *** 802.1ab ***
!

interface FastEthernet ALL
no lldp port 1/ALL,2/ALL,3/ALL config-notification
no lldp tx-tlv port 1/ALL,2/ALL,3/ALL local-mgmt-addr port-desc sys-desc sys-name
lldp tx-tlv port 1/1-24,2/1-24,3/1-24 dot1 port-vlan-id
lldp tx-tlv port 1/1-24,2/1-24,3/1-24 dot3 mac-phy-config-status
no lldp tx-tlv port 1/1-24,2/1-24,3/1-24 dot3 mdi-power-support
no lldp tx-tlv port 1/1-24 med inventory location
no lldp tx-tlv port 1/25-26 med inventory location med-capabilities network-policy
no lldp tx-tlv port 2/1-24 med inventory location
no lldp tx-tlv port 2/25-26 med inventory location med-capabilities network-policy
no lldp tx-tlv port 3/1-24 med inventory location
no lldp tx-tlv port 3/25-26 med inventory location med-capabilities network-policy
exit
!
! *** 802.1ab vendor-specific Avaya TLVs config ***
!
!
! *** 802.1AB MED Voice Network Policies ***
!
interface FastEthernet ALL
lldp med-network-policies port 1/3-24,2/1-24,3/1-24 voice dscp 46 priority 5 tagging tagged vlan-id 81
no lldp med-network-policies port 1/25-26,2/25-26,3/25-26 voice
exit
!