• September 22, 2020, 12:24:26 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?
« previous next »
Pages: [1]

Author Topic: 8630GBR brick  (Read 1801 times)

0 Members and 1 Guest are viewing this topic.

Offline bhusebye

  • Rookie
  • **
  • Posts: 12
8630GBR brick
« on: August 28, 2014, 01:33:35 PM »
Anyone know of a method for recovering an 8630GBR that was reset before a version upgrade finished?  I'm having it sent to me to see if anything can be done but I am feeling it will serve as a wonderful slot cover now.  And no, I didn't do it but my Telco owned operations center did ugh...
« Last Edit: August 28, 2014, 01:55:36 PM by bhusebye »
Logged

Offline Dominik

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1564
    • Networkautobahn
Re: 8630GBR brick
« Reply #1 on: August 29, 2014, 04:57:53 AM »
I would try to pull it in a LAB ERS8k Chassis ...  fingers crossed and you will see if the 8030GBR will be recognized.

If you become nothing back from the module there is nothing that I am aware of that you can do besides sending it to the Avaya support.

Logged
Itīs always the networks fault!
networkautobahn.com

Offline Michael McNamara

  • Administrator
  • Hero Member
  • *****
  • Posts: 3842
    • michaelfmcnamara
    • Michael McNamara
Re: 8630GBR brick
« Reply #2 on: August 29, 2014, 08:13:40 AM »
I had a few occasions where a 8630GBR would not boot in a specific chassis but if I moved it to another chassis then it would boot fine. I used the second chassis to upgrade the FPGA and software and that seemed to have fixed it.

Cheers!
Logged
We've been helping network engineers, system administrators and technology professionals since June 2009.
If you've found this site useful or helpful, please help me spread the word. Link to us in your blog or homepage - Thanks!
Pages: [1]
« previous next »