• September 24, 2020, 12:48:19 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: 8630GBR and rate limiting  (Read 2322 times)

0 Members and 1 Guest are viewing this topic.

Offline dekdek

  • Jr. Member
  • **
  • Posts: 45
8630GBR and rate limiting
« on: November 12, 2013, 09:59:29 AM »
hi,

i'm in a trouble with classical broadcast rate limitation with 8630GBR card.
for example :
ethernet 8/48 multicast-bandwidth-limit 600 enable
ethernet 8/48 broadcast-bandwidth-limit 600 enable

it's works great on 8648GTR & GTRS cards ! but NOT with 8630GBR card. All incoming bcast traffic
pass (i created a bcast storm to test it and used DeviceManager to observe ports counters)

CPU card is 8692SF (256 M) with no supermezz. Version is 5.1.2.0

thanks for help.
Cris.


Offline Michael McNamara

  • Administrator
  • Hero Member
  • *****
  • Posts: 3842
    • michaelfmcnamara
    • Michael McNamara
Re: 8630GBR and rate limiting
« Reply #1 on: November 13, 2013, 09:30:33 PM »
While I have the equipment in the lab, I just don't have the time right now to test this myself.

Perhaps you could try 5.1.7.x or 5.1.8.x software to see if that works?

I believe there were PIM and FPGA updates in 5.x software for the 8630GBR, where those performed?

http://blog.michaelfmcnamara.com/2009/08/upgrading-pim-fpga-firmware-on-8630gbr/

Sorry.
We've been helping network engineers, system administrators and technology professionals since June 2009.
If you've found this site useful or helpful, please help me spread the word. Link to us in your blog or homepage - Thanks!

Offline dekdek

  • Jr. Member
  • **
  • Posts: 45
Re: 8630GBR and rate limiting
« Reply #2 on: November 18, 2013, 08:33:56 AM »
ok, thanks gentleman ! i will try out.
but before it, how can i found PIM FPGA current revision of my 8630GBR card ?

thanks.