Network Infrastructure Forums

Extreme / Avaya / Nortel => Extreme / Avaya / Nortel Ethernet Switching => Topic started by: jahyde on January 11, 2019, 12:13:31 AM

Title: 5520 IGMP querier?
Post by: jahyde on January 11, 2019, 12:13:31 AM
Does it have a querier to keep a group alive?? In the status the Querier box says 0.0.0.0.

Or does anyone recommend a querier service for a windows workstation (unfortunately no nix on this LAN.
Title: Re: 5520 IGMP querier?
Post by: MatzeKS on January 14, 2019, 08:49:01 AM
The IGMP Querier should not have 0.0.0.0 - maybe you can try to set the Mgmt-IP instead


interface vlan 10
ip igmp snooping
ip igmp proxy
ip igmp send-query
ip igmp snoop-querier-addr 10.9.100.1
ip igmp version 3
exit
Title: Re: 5520 IGMP querier?
Post by: jahyde on January 15, 2019, 04:40:15 AM
I dont think it supports it, unless I am missing a setting somewhere else-
Code: [Select]
SW7(config-if)#ip igmp snoop-querier-addr 10.50.0.251
                            ^
% Invalid input detected at '^' marker.
SW7(config-if)#ip igmp ?
  last-member-query-interval  Configure last member query interval
  mrouter                     Configure multicast forwarding port(s)
  proxy                       Enable IGMP proxy
  query-interval              Configure query interval time
  query-max-response          Configure Max response time in query message
                              (1/10 of a second)
  robust-value                Configure robustness variable
  router-alert                Configure to accept IGMP packets with
                              router-alert option in IP header
  send-query                  Enable IGMP send query
  snooping                    Enable IGMP snooping
  version                     IGMP protocol version
Title: Re: 5520 IGMP querier?
Post by: MatzeKS on January 15, 2019, 05:02:48 AM
My config example came from the current BOSS version of ERS-4900/-5900.

Your ERS-5520 does not have this particular option.

Maybe you can try implement the options you have:

ERS-5510-48T(config-if)#ip igmp ?
  last-member-query-interval  Configure last member query interval
  mrouter                     Configure multicast forwarding port(s)
  proxy                       Enable IGMP proxy
  query-interval              Configure query interval time
  query-max-response          Configure Max response time in query message (1/10 of a second)
  robust-value                Configure robustness variable
  router-alert                Configure to accept IGMP packets with router-alert option in IP header
  send-query                  Enable IGMP send query
  snooping                    Enable IGMP snooping
  version                     IGMP protocol version
  <cr>


Unfortunately your ERS-55xx is out of "each" and will never get these options  ;)