• April 26, 2018, 10:54:28 PM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: 4850GTS Error uploading config file from usb  (Read 1397 times)

0 Members and 1 Guest are viewing this topic.

Offline rloughlin

  • Rookie
  • **
  • Posts: 3
4850GTS Error uploading config file from usb
« on: December 14, 2017, 06:39:45 PM »
Im trying to up load a config file from a previous backup of the 4850gts.  Im getting the % error - number of switches incorrect.  I am able to backup the current config and restore it but not the one from last month.

Any ideas.

Thanks

Ryan



Offline Michael McNamara

  • Administrator
  • Hero Member
  • *****
  • Posts: 3836
    • michaelfmcnamara
    • Michael McNamara
Re: 4850GTS Error uploading config file from usb
« Reply #1 on: December 31, 2017, 11:14:13 AM »
I'm guessing you are using the binary backup... would suggest you use the ASCII backup and see what needs to be cleaned up. It sounds like the old switch you have used to be part of a stack and that was never cleaned up.

Cheers!
We've been helping network engineers, system administrators and technology professionals since June 2009.
If you've found this site useful or helpful, please help me spread the word. Link to us in your blog or homepage - Thanks!

Offline krc

  • Rookie
  • **
  • Posts: 10
Re: 4850GTS Error uploading config file from usb
« Reply #2 on: January 12, 2018, 02:59:14 PM »
Pretty sure the stack count and code level have to be the exact same as it was when backed up.