• September 21, 2020, 02:13:44 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: 4548GT Vsphere NIC-Teaming  (Read 1529 times)

0 Members and 1 Guest are viewing this topic.

Offline Gansa28

  • Rookie
  • **
  • Posts: 8
4548GT Vsphere NIC-Teaming
« on: December 01, 2014, 04:58:47 PM »
Hi all,

XXXXXXXXX#show mlt
Id Name             Members                Bpdu   Mode           Status  Type
-- ---------------- ---------------------- ------ -------------- ------- ------
1  Trunk #1         1/45-46,2/45-46        All    Basic          Enabled Access
2  Trunk #2         1/43-44,2/43-44        All    Basic          Enabled Access
3  Trunk #3         1/47-48,2/47-48        All    Basic          Enabled Access
4  Trunk #4         NONE                   All    Basic          Disabled
5  Trunk #5         NONE                   All    Basic          Disabled
6  Trunk #6         NONE                   All    Basic          Disabled
7  Trunk #7         NONE                   All    Basic          Disabled
8  Trunk #8         NONE                   All    Basic          Disabled

i want to Team, 1 Vsphere, 1 Windows Server 2012r2 and on open-E Storage, across 2 Switches for HA, look this ok?

How can i now set a VLAN on the Trunks?

greetings

Gansa
« Last Edit: December 01, 2014, 06:42:29 PM by Gansa28 »


Offline Gansa28

  • Rookie
  • **
  • Posts: 8
Re: 4548GT Vsphere NIC-Teaming
« Reply #1 on: December 04, 2014, 06:12:28 AM »

Hi all,


so now all done, Vsphere is reachable over all VLANs, NIC Teaming is working over all Ports. I have choose Avayas recommended "IP-Hasch".

I have added a route to WAN Gateway but this is not persistent,

Code: newbielink:javascript:void(0); [nonactive]
XXXXXXXXX(config)#ip route 0.0.0.0 0.0.0.0 192.168.200.250 1
XXXXXXXXX(config)#show ip route
===============================================================================
                                        Ip Route
===============================================================================
DST             MASK            NEXT            COST    VLAN PORT PROT TYPE PRF
-------------------------------------------------------------------------------
Total Routes: 0
-------------------------------------------------------------------------------
TYPE Legend:
I=Indirect Route, D=Direct Route, A=Alternative Route, B=Best Route, U=Unresolv
ed Route, N=Not in HW
XXXXXXXXX(config)#

i found the added routes under

Code: newbielink:javascript:void(0); [nonactive]
XXXXXXXXX(config)#show running-config
! Embedded ASCII Configuration Generator Script
! Model = Ethernet Routing Switch 4548GT-PWR
.
.
.
ip route 0.0.0.0 0.0.0.0 192.168.1.1 1
ip route 0.0.0.0 0.0.0.0 192.168.2.1 1
ip route 0.0.0.0 0.0.0.0 192.168.200.250 1
ip route 192.168.0.0 255.255.255.0 192.168.0.254 1
ip blocking-mode none
!
#


how can i remove mot used "ip routes"?

i didnt found a command in Command reference.

Greetings Gansa28
« Last Edit: December 04, 2014, 06:42:09 AM by Gansa28 »