• December 16, 2017, 07:33:49 PM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: SR 2330 NAT  (Read 2798 times)

0 Members and 1 Guest are viewing this topic.

Offline eroman

  • Rookie
  • **
  • Posts: 16
SR 2330 NAT
« on: July 02, 2014, 10:06:38 PM »
Hello everyone

I have a SR2330 and I have a Switch from the ISP that give 6 IP public and wondering if you configure this any time before.
I want to use one interface from the router to go out to internet and the other to configure NAT translation from outside to inside.

Thankyou for the replies.

REgards


Offline Telair

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 953
Re: SR 2330 NAT
« Reply #1 on: July 04, 2014, 05:42:53 PM »
If I understand you, I don't see that being a problem.  Most offices use a single IP for their outbound NAT from the internal network and use other IP's as static NAT's for DMZ'ed services like FTP or e-mail.

Offline eroman

  • Rookie
  • **
  • Posts: 16
Re: SR 2330 NAT
« Reply #2 on: July 21, 2014, 07:14:29 PM »
Hello and Thanks

Well now I pass some traffic for one interface and other for the other one, but I want to know how to implement route map in this kind of router, that is because I want a subnet to go out for the first interface and other subnet to other.

Offline Pittarwan

  • Rookie
  • **
  • Posts: 2
Re: SR 2330 NAT
« Reply #3 on: September 30, 2016, 03:07:09 AM »
Knowledge is really wonderful. I'm not used to talking this much.