• November 14, 2018, 09:17:12 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: NX5500 and AP7522 confusion  (Read 1143 times)

0 Members and 1 Guest are viewing this topic.

Offline peawet08

  • Rookie
  • **
  • Posts: 1
NX5500 and AP7522 confusion
« on: August 29, 2018, 09:36:43 AM »
Hi,

I wonder if you can help...

I have inherited an NX5500 controller and I hate it!!  Having used Cisco, Ubiquiti and Sonicwall before, this is the worse I have used, but I have to work with it.

Are there any good guides that would help me understand.configure the unit?  I am googling and finding information piecemeal but it doesn't always explain things well.

I have setup the controller on a 2 VLANs (v10 = MGMT, v11=Control)
Setup a Wireless network and assigned the wireless in the default profile for the AP7522.

I have some access points that have previously connected to this controller (in a different configuration) or to another Controller.  2 Access Points are showing as online but the remaining access points are not being adopted.
I have tried setting up DHCP (with option 191) on the Control network and some of the AP's have received IP addresses but not all.

Is it possible to trigger a scan from the controller to list AP's on the v11 VLAN?

Thanks
Mark