• October 21, 2019, 12:18:50 PM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: Adding 2332A-E1 Access Point to a Nortel 2382 WSS  (Read 4286 times)

0 Members and 1 Guest are viewing this topic.

Offline rphadagi

  • Rookie
  • **
  • Posts: 2
Adding 2332A-E1 Access Point to a Nortel 2382 WSS
« on: January 31, 2013, 05:41:04 AM »
Hi Guys

I have been trying to add 233A-E1 Access Point to my 2382 WSS. I have tried to add the AP through the WSS GUI and CLI and i can the AP on the WSS but not on the WMS 7.1. IF i add it using the WMS i cannot see it on the WSS GUI or the CLI. The APP lights keep blinking orange. I have tried using Auto AP on the WMS but that does not pick up the AP. I have checked my switch config where the AP is connected and its configured correctly. I would really appreciate any assistance.

Thanks and regards

Rasi


Offline Tony

  • Full Member
  • ***
  • Posts: 91
Re: Adding 2332A-E1 Access Point to a Nortel 2382 WSS
« Reply #1 on: February 01, 2013, 04:26:18 PM »
1. is it new firmware of AP?
2. you might need to connect AP directly to 2382 to synch the firmware. it was happended to me

Cheers

Offline rphadagi

  • Rookie
  • **
  • Posts: 2
Re: Adding 2332A-E1 Access Point to a Nortel 2382 WSS
« Reply #2 on: February 22, 2013, 07:48:11 AM »
Hi KT

Thanks for the feedback. It seems that the problem is with the software on the WSS.

Thanks