• September 18, 2020, 04:11:43 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: RFS6000 - Tagging vlans  (Read 2741 times)

0 Members and 1 Guest are viewing this topic.

Offline David

  • Jr. Member
  • **
  • Posts: 27
RFS6000 - Tagging vlans
« on: February 24, 2015, 04:24:04 AM »
Hello all,

I have an issue with a RFS6000 controler and vlan.
How to do to tag a vlan on the configuration ?

Trunk and select the good vlan ?

Thanks a lot for your help.

Best regards.

David


Offline McNulty

  • Sr. Member
  • ****
  • Posts: 217
Re: RFS6000 - Tagging vlans
« Reply #1 on: February 26, 2015, 11:46:47 PM »
Hi David.
This is really quite simple, do you have the manual?
What have you tried so far?

Offline David

  • Jr. Member
  • **
  • Posts: 27
Re: RFS6000 - Tagging vlans
« Reply #2 on: February 27, 2015, 08:11:36 AM »
Yes I have manual. I have put my Ge Port in Trunk and Allowed Vlan1 and Vlan5.

Offline McNulty

  • Sr. Member
  • ****
  • Posts: 217
Re: RFS6000 - Tagging vlans
« Reply #3 on: February 27, 2015, 01:27:42 PM »
Did you set the native clan? What exactly is the issue you are seeing?

Offline hchen01

  • Full Member
  • ***
  • Posts: 73
Re: RFS6000 - Tagging vlans
« Reply #4 on: March 05, 2015, 11:23:23 PM »
you can create the vlan under interface, using DHCP to test if it's OK.