• September 18, 2020, 04:04:27 PM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: RFS6000 controller does not recognize access points over mesh  (Read 2629 times)

0 Members and 1 Guest are viewing this topic.

Offline george1234

  • Rookie
  • **
  • Posts: 5
RFS6000 controller does not recognize access points over mesh
« on: November 17, 2013, 03:44:49 PM »
RFS6000 WING 5.5
Ap7161 WING 5.5
controller does not recognize access points over mesh, but can ping Ap's
 :(

On cable is ok.


Offline hchen01

  • Full Member
  • ***
  • Posts: 73
Re: RFS6000 controller does not recognize access points over mesh
« Reply #1 on: November 19, 2013, 05:01:54 PM »
any adoption settings on the mesh AP via AP08?
I reckon that you need to configure the controller's IP address on the mesh AP.

Offline george1234

  • Rookie
  • **
  • Posts: 5
Re: RFS6000 controller does not recognize access points over mesh
« Reply #2 on: November 20, 2013, 12:57:47 AM »
Nop, nothing check there.

Offline romnet

  • Jr. Member
  • **
  • Posts: 25
Re: RFS6000 controller does not recognize access points over mesh
« Reply #3 on: December 01, 2013, 02:00:57 AM »
hi,

can you post the relevant parts of your show run please ? I might be able to help.

romain