• October 20, 2020, 01:16:29 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: Profile AP 6532 Port Trunking  (Read 2784 times)

0 Members and 1 Guest are viewing this topic.

Offline superbaim

  • Full Member
  • ***
  • Posts: 67
Profile AP 6532 Port Trunking
« on: January 15, 2014, 04:21:28 AM »
Hi,

I already assign profile for my AP, the ap adopted and assigned a profile, but the interface eth is still show access mode although in the profile i assign eth is trunk. Heres my config in profile
ge1: Mode Trunk, Native vlan 3598(vlan mgmt), tag native vlan not checked, allowed vlan, 3548 (vlan-data).

In my switch(juniper), i set

interfaces {
    ge-0/0/0 {
        unit 0 {
            family ethernet-switching {
                port-mode trunk;
                vlan {
                    members [ VLAN_DATA ];
                }
                native-vlan-id 3598;
            }
        }
    }

How to config to match beetwen juniper ex switch and ap 6532 ?

Thx



Offline superbaim

  • Full Member
  • ***
  • Posts: 67
Re: Profile AP 6532 Port Trunking
« Reply #1 on: January 15, 2014, 11:09:21 AM »
sorry, the config in juniper an moto ap is right. i just miss to check obtain gateway and dns from dhcp in ap profile section vlan - vlan mgmt. thx