• November 27, 2020, 05:49:05 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: OSPF RFS7000 n ERS8600  (Read 2187 times)

0 Members and 1 Guest are viewing this topic.

Offline superbaim

  • Full Member
  • ***
  • Posts: 67
OSPF RFS7000 n ERS8600
« on: December 18, 2013, 02:43:21 AM »
Hi,

Is there an unwriten universe pattern here that there is a good change that someone who use nortel would probably have high chance have/choose motorola AP too :)) and perhaps using fw1 to :)) .
Btw i want to know how to configure ospf area 0 beetwen rfs7000 and ers8600 ? heres my config that doesnt work

RFS7000 :

interface ge4
  switchport mode access
  switchport access vlan 908
  ip dhcp trust
  qos trust dscp
  qos trust 802.1p
interface vlan908
  ip address 10.62.1.67/29

router ospf
  ospf enable
  network 10.62.1.0/24 area 0.0.0.0
  area 0.0.0.0
   area-type nssa
  auto-cost reference-bandwidth 1
  passive all
  no passive vlan908

ERS 8600 :
vlan 908 create byport 1 name "v908 - WLC" color 1
vlan 908 ports remove 1/1-1/30,3/1-3/8,7/1-7/2,7/4-7/48 member portmember
vlan 908 ports add 7/3 member portmember
vlan 908 ip create 10.62.1.65/255.255.255.248 mac_offset 3
vlan 908 ip ospf enable

i configure port 7/3 as untagged port(access port)

Thx



Offline hchen01

  • Full Member
  • ***
  • Posts: 73
Re: OSPF RFS7000 n ERS8600
« Reply #1 on: January 06, 2014, 12:38:12 AM »
router ospf
  ospf enable
  network 10.62.1.0/24 area 0.0.0.0

should it be:

router ospf
  ospf enable
  network 10.62.1.64/29 area 0.0.0.0