• November 24, 2020, 06:25:42 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: Motorola AP6521 uboot DIAG password?  (Read 7387 times)

0 Members and 1 Guest are viewing this topic.

Offline djccy

  • Rookie
  • **
  • Posts: 1
Motorola AP6521 uboot DIAG password?
« on: August 20, 2018, 02:06:37 PM »

ncap> ?
?       - alias for 'help'
athrs26 - athrs26 switch/phy commands
base    - print or set address offset
bdinfo  - print Board Info structure
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootm   - boot application image from memory
bootp   - boot image via network using BOOTP/TFTP protocol
bootx   - boot a redundant kernel/rootfs image
cmp     - memory compare
coninfo - print console devices and information
cp      - memory copy
crc32   - checksum calculation
diag    - enter into the diagnostics mode
echo    - echo args to console
erase   - erase FLASH memory
flinfo  - print FLASH memory information
fw      - firmware commands
go      - start application at address 'addr'
gpio    - gpio commands
help    - print command description/usage
iminfo  - print header information for application image
imls    - list all images found in flash
imxtract- extract a part of a multi-image
iol     - IOL ethernet link tests
itest   - return true/false on integer compare
loadb   - load binary file over serial line (kermit mode)
loady   - load binary file over serial line (ymodem mode)
loop    - infinite loop on address range
md      - memory display
mii     - MII utility commands
mm      - memory modify (auto-incrementing address)
mtest   - simple RAM read/write test
mw      - memory write (fill)
nand    - nand commands
nfs     - boot image via network using NFS protocol
nm      - memory modify (constant address)
pci     - list and access PCI Configuration Space
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
progfw  - download/program full firmware image (via tftp)
protect - enable or disable FLASH write protection
rarpboot- boot image via network using RARP/TFTP protocol
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
runmfg  - run in manufacturing mode
saveenv - save environment variables to persistent storage
setenv  - set environment variables
sleep   - delay execution for some time
tftpboot- boot image via network using TFTP protocol
version - print monitor version
wd      - watchdog control
ncap> diag

Usage - diag <password>

ncap> diag password ?

Offline McNulty

  • Sr. Member
  • ****
  • Posts: 217
Re: Motorola AP6521 uboot DIAG password?
« Reply #1 on: October 02, 2018, 09:00:44 PM »
I'm sure that the TAC have this password