• November 27, 2020, 05:59:13 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: LoadBalance betwen controllers  (Read 2309 times)

0 Members and 1 Guest are viewing this topic.

Offline leonardo.ortiz

  • Rookie
  • **
  • Posts: 22
LoadBalance betwen controllers
« on: October 23, 2014, 06:44:39 AM »
Hello.

Can we auto balance the AP's with two controllers ?

We have 30 AP's and all are adopted by the primary controller, this controller is all time with 90%+ of RAM in use...


Offline alphil

  • Rookie
  • **
  • Posts: 4
Re: LoadBalance betwen controllers
« Reply #1 on: November 04, 2014, 06:04:33 PM »
Did you configure a cluster with your controllers? AP balancing is automatic in a cluster.

Offline Goose

  • Jr. Member
  • **
  • Posts: 33
Re: LoadBalance betwen controllers
« Reply #2 on: November 06, 2014, 09:09:22 AM »
take a look at the "Cluster_configuration_WiNG_5.4" document.. ;)

Offline hchen01

  • Full Member
  • ***
  • Posts: 73
Re: LoadBalance betwen controllers
« Reply #3 on: November 10, 2014, 06:07:22 PM »
you can setup 2 different controller groups and under adoption of the APs, choose different controller group.