• November 27, 2020, 07:04:43 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: Flashing ap650 with independent firmware  (Read 3813 times)

0 Members and 1 Guest are viewing this topic.

Offline KristofferD

  • Rookie
  • **
  • Posts: 1
Flashing ap650 with independent firmware
« on: October 16, 2013, 08:07:49 AM »
Hello

Does anybody know if its possible to flash a ap650 with a independent firmware? I've come across two of these APs really cheap but there's no controller :(

Thanks.


Offline McNulty

  • Sr. Member
  • ****
  • Posts: 217
Re: Flashing ap650 with independent firmware
« Reply #1 on: October 17, 2013, 11:43:54 PM »
Not possible in theory as ap650 is dependant AP.

But there might be a method you can try if you are willing to brick the device

1. Connect to controller - configure with all standalone settings
2. Configure "Configuration Persistence"
3. Remove from controller

Don't know if this will work, but if it doesn't you will have a nice brick!

Offline noobie

  • Full Member
  • ***
  • Posts: 92
Re: Flashing ap650 with independent firmware
« Reply #2 on: October 18, 2013, 11:26:14 AM »
sorry, but this will not work. The main principle of dependent or 3digit APs - shutdown radio's upon unadoption.
Config-persistence would not help here.