• September 18, 2020, 04:39:32 PM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: Controllers in Remote Sites  (Read 2142 times)

0 Members and 1 Guest are viewing this topic.

Offline alexey

  • Rookie
  • **
  • Posts: 20
Controllers in Remote Sites
« on: October 30, 2015, 09:26:40 AM »
Hello.

There is a central data center with a cluster of rfs 4010. There is a remote sites where the same set rfs 4010 controllers that control ap650 access ports. Tell me please how to add the management of remote controllers at remote sites to a central cluster?


Offline McNulty

  • Sr. Member
  • ****
  • Posts: 217
Re: Controllers in Remote Sites
« Reply #1 on: November 01, 2015, 04:34:02 PM »
Make sure you are running firmware 5.7 or 5.8. You should then see the option available.

Offline alexey

  • Rookie
  • **
  • Posts: 20
Re: Controllers in Remote Sites
« Reply #2 on: November 02, 2015, 12:57:10 AM »
Yes, I have the software version 5.7. But I can not understand in what section of the menu to add the remote controller to control. If I try to add the controller in the device menu, I proposed to introduce mac address instead of ip. Maybe add a remote controller as something else?

Offline alexey

  • Rookie
  • **
  • Posts: 20
Re: Controllers in Remote Sites
« Reply #3 on: November 02, 2015, 08:18:09 AM »
Thank you, I found a menu option.