• November 25, 2020, 11:28:30 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: Clustering with wing5.5  (Read 2924 times)

0 Members and 1 Guest are viewing this topic.

Offline MartinB

  • Rookie
  • **
  • Posts: 7
Clustering with wing5.5
« on: December 10, 2013, 11:31:46 AM »
I'd like to know what you are using as a clustering setup with wing 5.5

Active/Standy or Active/Active with a 2 controler setup? i asked two tier 2 at Moto and I got 2 different answers.
« Last Edit: December 10, 2013, 11:33:37 AM by MartinB »


Offline vozzibaer

  • Rookie
  • **
  • Posts: 3
Re: Clustering with wing5.5
« Reply #1 on: December 18, 2013, 04:40:29 AM »
Hi Martin,

I work with 5.4.4 and we use the active/active setup. This works well. But we have a problem, if when we put more AP's in the network as licensed are, than the switches are going into a cpu-overload state and showing wrong or nothing data. Be verry carefull! Now we add additional licenses and all is o.k.

Regards,

Michael

Offline noobie

  • Full Member
  • ***
  • Posts: 92
Re: Clustering with wing5.5
« Reply #2 on: December 26, 2013, 01:18:44 PM »
I would say, unless you have too many APs than one RFS can handle - use active/standby. It will provide you with some sort of redundancy, while active/active is more for huge installations when you need load-balancing.
With active/active you need to be very careful with cluster MiNT config (not creating millions of duplicated links), as both members would be up and it could cause problems.