• February 22, 2018, 01:33:19 PM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: SPB adjacencies  (Read 1031 times)

0 Members and 1 Guest are viewing this topic.

Offline rodjeur68

  • Rookie
  • **
  • Posts: 15
SPB adjacencies
« on: October 18, 2016, 01:52:43 PM »
Hello guys,

Recently equipped with VSP7200, we've migrated to SPB two months ago. I don't know if one of you is a SPB specialist but I asked me if, in your opinion, it could be possible that a VSP could form multiple isis adjacencies on the same physical interface.

Thanks.

Rodjeur


Offline Řyvind Nikolaisen

  • Full Member
  • ***
  • Posts: 50
Re: SPB adjacencies
« Reply #1 on: November 09, 2016, 04:53:35 AM »
Nope, just one adjacency per interface. Point-to-multipoint is presently not supported, don't know if it's in the roadmap or not. However, on the VSP7200/8x00 you can use Fabric Extend where you have physical interface with a number of logical interfaces. Still point-to-point, but at least you use just one port to extend your SPB network across an external L3 network.
Best regards,

Řyvind Nikolaisen
Senior Network Architect
NetNordic Communications AS
Avaya ACE Fx #204

Offline WillyHe2

  • Rookie
  • **
  • Posts: 4
Re: SPB adjacencies
« Reply #2 on: November 24, 2017, 09:54:21 AM »
Just want to add that SPBM Fabric Extend supports both FE over L2 broadcast and L3 routed networks.
WillyHe
ACE FX #90