• February 19, 2018, 01:14:56 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: introducing nx-os vs. hp to an IOS environment  (Read 956 times)

0 Members and 1 Guest are viewing this topic.

Offline avraham

  • Rookie
  • **
  • Posts: 1
introducing nx-os vs. hp to an IOS environment
« on: August 09, 2015, 04:12:39 AM »
we're interested in hearing experiences when introducing cisco nexus switches to an exclusively catalyst IOS environment.
particularly interested in hearing about problems and learning curve.

likewise, we'd like to hear the same about introduction of hp switches into a cisco catalyst IOS environment.

\tnx,
ams


Offline Michael McNamara

  • Administrator
  • Hero Member
  • *****
  • Posts: 3834
    • michaelfmcnamara
    • Michael McNamara
Re: introducing nx-os vs. hp to an IOS environment
« Reply #1 on: May 26, 2016, 09:20:50 AM »
This topic is more than a little old but the CLI interfaces are substantially different between HP and Cisco.

How you think about VLANs and ports is the biggest different.

Now if you want a really change, look at the Juniper CLI - that's a much bigger change but interestingly enough I enjoy the JunOS CLI interface.

Cheers!
We've been helping network engineers, system administrators and technology professionals since June 2009.
If you've found this site useful or helpful, please help me spread the word. Link to us in your blog or homepage - Thanks!