• August 19, 2018, 10:55:35 PM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?

Author Topic: Brocade MLXe and VLAN's  (Read 1281 times)

0 Members and 1 Guest are viewing this topic.

Offline Telair

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 962
Brocade MLXe and VLAN's
« on: January 28, 2015, 05:49:56 PM »
Pro-tip time.  Brocade MLXe's by default won't pass an non-routed L2 VLAN across ports even if the VLAN configuration is correct on the box.  This is because MLXe's operate in "pure router mode" and won't switch packets between ports.  Routing packets is fine, switching is not.  The key to make them switch packets is the command "no route-only".  This will enable L2 VLAN switching of packets.  I know I am not the only person to hit this "feature" when working on an MLXe router.

Now I know.  And knowing is half the battle.


Offline Manowsuwan

  • Rookie
  • **
  • Posts: 2
Re: Brocade MLXe and VLAN's
« Reply #1 on: July 25, 2018, 04:58:46 AM »
I read it is very good. The content has been read, it is very useful.