• February 06, 2012, 03:20:24 PM
Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic: Recovery admin password  (Read 1208 times)

0 Members and 1 Guest are viewing this topic.

Offline mihais

  • Rookie
  • **
  • Posts: 1
Recovery admin password
« on: August 05, 2009, 03:53:22 PM »
Hello!
I have a big problem with a contivity 1740.
I cant log in at all...  :'(
I try to use serial cable but i need administrator's password and i don't know pass. I try with recovery disk but i cant access management ip... :(
Please help!


Offline Michael McNamara

  • Administrator
  • Hero Member
  • *****
  • Posts: 2151
    • Michael McNamara
Re: Recovery admin password
« Reply #1 on: August 09, 2009, 01:47:55 PM »
Hi Mihais,

The password is stored within flash memory and not on the actual hard disk of the VPN router. You'll either need to know the admin password or the IP address in order to factory reset the VPN router. You may be able to determine the router's IP address by performing a packet capture of the local area network and see what source IP address the device is using once it boots up.

While you've already commented in the blog I'll post the URL here for those that will follow you;
http://blog.michaelfmcnamara.com/2008/07/nortel-vpn-router-recovery-floppy-disk/

Good Luck
If you've found this site useful and helpful, please help me spread the word. Link to us in your blog or homepage or Tweet about us! - Thanks!

Offline lightstorm

  • Rookie
  • **
  • Posts: 1
Re: Recovery admin password
« Reply #2 on: January 07, 2010, 12:00:10 AM »
Hi all,

 :( I lose administrator's password of contivity 1740. I have a recovery floppy-disk but i don't known management ip address. I want to restore original factory setting. I used Advandce ip scan and Wireshark to find it's ip but not found. Please help me! Thanks so much!

Offline Michael McNamara

  • Administrator
  • Hero Member
  • *****
  • Posts: 2151
    • Michael McNamara
Re: Recovery admin password
« Reply #3 on: January 07, 2010, 07:24:26 AM »
Hi Lightstorm and welcome to the forums!

As mentioned above it's not possible to factory reset the box without having the IP address. Short of that you'll need to RMA the router to Nortel/Avaya for repair.

Good Luck!

PS: I've deleted your post on the blog, no need to make duplicate requests under different usernames, Bruce Lee.
« Last Edit: January 07, 2010, 07:30:34 AM by Michael McNamara »
If you've found this site useful and helpful, please help me spread the word. Link to us in your blog or homepage or Tweet about us! - Thanks!