Nortel L2 Functionality ! Connection Two Sites over L2 Functionality

[sheraz14]

Hello Guys,

We are setting up two sites over the  Microwave Link. Let mhe explain the setup ..

Site A :

Customer have 3 switches, and each switch is configure with the 3 different subnet

Switch A : 172.20.30.x | Switch B : 10.10.10.x | Switch C : 192.168.10.x

Site A has Microwace link which is connected all the way to their Microware Switch ..


Site B :

Customer have 3 switches, and each switch is configure with the 3 different subnet

Switch A : 172.20.30.x | Switch B : 10.10.10.x | Switch C : 192.168.10.x

Site A has Microwace link which is connected all the way to their Microware Switch ..




Means both sites have 3 subnet and all 3 subnets are the same..

Now customer wanst to place the contivity in between the switchs and micrOWAVE link.. (both site A , B)



And customer dosent want routing in between switch A, B, C

Please help me on this ... Becuase its not BO to BO configuration..

Please find the attached Diagram...

Regards

[Michael McNamara]

Hi sheraz14,

When you say the customer doesn't want "routing between A, B, C" what exactly do you mean?

Are you looking to "bridge" between these network segments without routing?

Is there a requirement to encrypt the traffic across the microwave link?

That's an interesting problem you have... are you thinking about using a NVR? You have multiple Ethernet interfaces on the NVR, one for each switch and one for the link to the microwave connection?

Let us know what your thinking...

Good Luck