• February 09, 2012, 11:05:12 AM
Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic: Configuring BSR222 with dynamic public ip address for contivity client only  (Read 1564 times)

0 Members and 4 Guests are viewing this topic.

Offline khero

  • Rookie
  • **
  • Posts: 2
Hi everybody!
I'm trying to configure a Nortel BSR222 for contivity Client only: I'have a site with dynamic public IP address and want to connect teleworker to my site (Nortel BSR is behind a TPlink adsl modem router used as a bridge)
I'm using Nortel document (i have used Nortel documents NN48500-508) but no success!
Please! anyone can help me!
Thanks


Offline Michael McNamara

  • Administrator
  • Hero Member
  • *****
  • Posts: 2157
    • Michael McNamara
Hi khero and welcome to the forums!

I don't believe you can accomplish what you are trying to-do with a dynamic IP address on your main office site. If I understand you correctly you are trying to connect a remote Nortel VPN client to BSR222 that has a dynamic IP address assigned to the WAN interface.

You can certainly configure ABOT tunnels with a branch office site using a dynamic IP address on the remote office BSR222 but the main office BSR222 needs to have a static IP address on the WAN interface.

I would suggest trying to configure the IP address that is provided via DHCP statically in the BSR222. If that configuration works then you know you need a static IP address. You could probably also contact your Internet Service Provider and see how much they charge for a static IP address.

Good Luck!
If you've found this site useful and helpful, please help me spread the word. Link to us in your blog or homepage or Tweet about us! - Thanks!

Offline khero

  • Rookie
  • **
  • Posts: 2
Thank's Michael! i'll try it!!