• May 22, 2012, 10:13:38 PM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?
« previous next »
Pages: [1]

Author Topic: Conectivity 1100 Configure WAN via Web Interface  (Read 490 times)

0 Members and 1 Guest are viewing this topic.

Offline snarpon

  • Rookie
  • **
  • Posts: 7
Conectivity 1100 Configure WAN via Web Interface
« on: September 10, 2011, 03:13:30 PM »
Client switched from dsl to cable and I am remoting in. In the web interface there is a section for WAN, but you can't make any changes here. Is this disabled somewhere? Problem is my static default gateway ends in a .6 and the 1100's assume your gateway ends in a .1 unless changed. I just don't want to have to ship this back to me just to configure it.
Logged

Offline snarpon

  • Rookie
  • **
  • Posts: 7
Re: Conectivity 1100 Configure WAN via Web Interface
« Reply #1 on: September 10, 2011, 03:44:14 PM »
Think I just found my own answer but will need to test on Monday. Looks like you can add this info under routing->static routes
Logged

Offline Michael McNamara

  • Administrator
  • Hero Member
  • *****
  • Posts: 2517
    • Michael McNamara
Re: Conectivity 1100 Configure WAN via Web Interface
« Reply #2 on: September 10, 2011, 04:58:57 PM »
Hi and welcome to the forums!

If you need to change the interface you'll find the Ethernet interfaces under the LAN interfaces, the WAN interfaces are for legacy T1 and D3 interfaces.

Good Luck!
Logged
We've been helping network engineers, system administrators and technology professionals since June 2009.
If you've found this site useful or helpful, please help me spread the word. Link to us in your blog or homepage - Thanks!

Offline snarpon

  • Rookie
  • **
  • Posts: 7
Re: Conectivity 1100 Configure WAN via Web Interface
« Reply #3 on: September 12, 2011, 07:50:22 AM »
Yes but under LAN there is no place to enter the Default Gateway.
Logged

Offline Telair

  • Sr. Member
  • ****
  • Posts: 133
Re: Conectivity 1100 Configure WAN via Web Interface
« Reply #4 on: September 12, 2011, 04:44:55 PM »
Yep, as you found the default gateway(s) have to be entered under the static routing page.  I always thought it was odd to separate the static IP and subnet from the gateway entry.
Logged

Offline snarpon

  • Rookie
  • **
  • Posts: 7
Re: Conectivity 1100 Configure WAN via Web Interface
« Reply #5 on: September 12, 2011, 06:06:32 PM »
Thanks, that is very odd.
Logged
Pages: [1]
« previous next »