Nortel ip phones changing n/w settings

[phoenix]

Hi ,

Please advice how to change these settings

"1150 Phone
LLDP - ticked
DHCP - yes
Enable Voice 802.1Q - ticked
VoiceVLAN - auto
Enable PC Port - ticked
Enable Data 802.1Q - unticked
PCPort Untag All - ticked
Cached IP - unticked
"

in nortel ip phone 1150e .

After giving the administrator password iam able to see the network settings screen ,but unable to change these paramaeters in the way i want.

Please advice.

[Michael McNamara]

You should use the 'Enter/Select' key at the center of the navigation pad (Up,Down,Left,Right).

Use the Right key to move through the configuration options, use the Enter key to open the option and/or open a drop down list of values to choose.

Good Luck!

[phoenix]

Hi ,

Thanks.

1)But how to check and uncheck the options?

Iam unable to check or uncheck ?

Thanks ,
phoenix.

[Michael McNamara]

You should be able to use the 'Enter' key in the middle of the arrows to select and change each option.

I'm assuming that you've enter the configuration password and that the IP phone hasn't been locked with another password by your telecom department.

Good Luck!

[Michael McNamara]

I did forget that depending on the version of software running on the IP phone you may have an option titled "Auto" at the bottom of the configuration screen. The options may be "locked" out from manual configuration because of the way the phone was originally configured and/or currently deployed. You can select "Auto" and then select "AllMan" which will set every option to a manual configuration from the IP phone handset itself as opposed to be configured via DHCP or LLDP-MED, etc.

Good Luck!