i2007 Phones...

[SoNix]

Hi,

I'm trying to upgrade my i2007 Phone to UniStim 3.4 Release... (Currently running 2007 Firmware Release 3.1 - 0621C6H )

The Phone Reboot, Connect to the FTP, Read the i2007.cfg.
He download from the [FW] bracket.

Here is my i2007.cfg

Code:

#
# Config file: IP Phone 2007 - version 29
#
# Include the [FW] line only if the phone is already running firmware version 0621C4x or later
[FW]                   
DOWNLOAD_MODE AUTO
#DOWNLOAD_MODE FORCED
VERSION 0621C6R
FILENAME 0621C6R.bin
PROTOCOL TFTP
#PROTOCOL HTTP
SERVER_IP 172.18.71.20
#SERVER_PORT xxxxx
SECURITY_MODE 0

After the Phones Download, the file i Got an error "No Signature Found"...

Anyone has a Clue

[Michael McNamara]

Hi SoNix,

You might need to perform an interim upgrade or two before jumping to 0621C6R (UNIStim 3.4).

Have you tried upgrading in steps from 0621C6H to 0621C6M (UNIStim 3.2), then to 0621C6P (UNIStim 3.3) and then to 0621C6R (UNIStim 3.4).

I believe there's even a mention in the release notes.

You can find a the release notes on my blog by searching for UNIStim;
http://blog.michaelfmcnamara.com/?s=unistim

Good Luck!

[SoNix]

Thanx Michael,

This is exactly what i need to do... Now my i2007 is upgraded to UniStim3.4...

My question now :

- There is a way to let the phone upgrade alone ?  Like add multiple tag :

Code:

VERSION 0621C6H
FILENAME 0621C6H.BIN
VERSION 0621C6R
FILENAME 0621C6R.bin

Or there is a way to FORCE the phone to upgrade remotely ?
Thanx

[Michael McNamara]

You would still need to step threw the upgrades but you can reset all phones from the Signaling Server with the following command 'iSetResetAll' will cause all IP phones to reboot. If there are any that are not at the proper version of software they will upgrade after they reboot. Please be aware that this will reset ALL your IP phones, unless of course there is a call in progress. In that situation the system will wait until the phone goes idle and then reset the phone.

Good Luck!