[425-24] agent don't start

[dinistic]

Hey guys.

I'm not sure if it's common or not, I've an start up issue on one of my old Nortel 425-24T..

I've power on the 425 and it stops at Start Agent Code..

Do you know if I can recover it?

Cheers





Ethernet Switch 425-24  Diagnostics 3.6.0.1

Testing main memory - PASSED

Resets: 451.
Initializing Flash..
Reading MAC Address..
MAC Address: 00:18:B0:F2:B9:20
Initializing Switch CBs
Initializing Switch HW..
Board Revision:       0
Board Variation:      0
Manufacture Revision: 32
Manufacture Date:     09132006
Serial Number:        SACC4909JU
MAC Address:          00:18:B0:F2:B9:20
GBIC Type [25]:       (none)
GBIC Type [26]:       (none)
Stack In  Cable:      (none)
Stack Out Cable:      (none)
Stack Base Switch:    OFF

Type: Address: Name:__________ Version:
DIAG  00000000 425 Diags       3.6.0.1
AGENT 00100000 425/325 AGENT   3.6.1.04


Test 102  ROM  Config                - PASSED
Test 104  FANs                       - PASSED
Test 207  DRAM Cached/Uncached       - PASSED
Test 211  PCI  Bridge Registers      - PASSED
Test 221  PHYs Register              - PASSED
Test 233  SOC  XRAM Adr/Data Lines   - PASSED
Test 241  Link Status Interrupt      - PASSED
Test 242  SNMP-DMA Interrupt         - PASSED
Test 251  Ports Internal Loopback    - PASSED

Starting Agent Code..

[Michael McNamara]

You could try factory resetting the switch (erasing the configuration).

http://blog.michaelfmcnamara.com/2007/11/factory-reset-nortel-ethernet-switch/

Good Luck!

[dinistic]

You could try factory resetting the switch (erasing the configuration).

http://blog.michaelfmcnamara.com/2007/11/factory-reset-nortel-ethernet-switch/

Good Luck!

worked just fine.

cheers

[Michael McNamara]

worked just fine.

cheers

I'm happy to hear you were able to resolve the problem.

Cheers!