all -
I have a problem with handset 6120 with one-way audio to external calls. it woked internal calls b/w IP phones and wireless phones through BCM. I checked all the ports are full duplex (data switch and WLAN 2360) and the customer did not have FW/NAT. The BCM , Data switch and WLAN 2360 are using one subet 192.168.185.0/24. The AP is configured and connected one radio only b/c it used voice only. here is the configure of WLAN2360
WSS_2360# show config
# Configuration nvgen'd at 2011-7-14 17:12:34
# Image 6.0.4.6.0
# Model 2360
# Last change occurred at 2011-7-14 16:52:26
set ip route default 192.168.185.1 1
set system name WSS_2360
set system ip-address 192.168.185.3
set system countrycode US
set timezone cst -8 0
set service-profile WVoIP ssid-name WVoIP
set service-profile WVoIP proxy-arp disable
set service-profile WVoIP auth-fallthru last-resort
set service-profile WVoIP wpa-ie enable
set service-profile WVoIP psk-raw 760967b62c1dbd2cbbe21e5047c3cb83aa50207e29ffae68ace8fac2147e31b1
set service-profile WVoIP auth-psk enable
set service-profile WVoIP auth-dot1x disable
set service-profile WVoIP attr vlan-name voice
set enablepass password 3126d2440764d56e521f77266e30a587c9d9
set user wssadmin password encrypted 082d495a041c0c19
set radio-profile brad auto-tune channel-config disable
set radio-profile brad qos-mode svp
set radio-profile brad service-profile WVoIP
set radio-profile disable
set radio-profile enable
set ap 1 serial-id nntmjl5115vt model 2332-A1
set ap 1 radio 1 radio-profile brad mode enable
set ap 2 serial-id nntmjl5116n6 model 2332-A1
set ap 2 radio 1 channel 11 radio-profile brad mode enable
set ap 3 serial-id nntmjl5116n7 model 2332-A1
set ap 3 radio 1 channel 8 radio-profile brad mode enable
set ap 4 serial-id nntmjl5116nj model 2332-A1
set ap 4 radio 1 channel 10 radio-profile brad mode enable
set ip https server enable
set ip telnet server enable
set vlan 1 name voice
set vlan 1 port 1
set vlan 1 port 2
set vlan 1 port 3
set vlan 1 port 4
set vlan 1 port 5
set vlan 1 port 6
set vlan 1 port 7
set vlan 1 port 8
set interface 1 ip 192.168.185.3 255.255.255.0
set security acl ip spectralink permit cos 7 119 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255
set security acl ip spectralink permit 0.0.0.0 255.255.255.255
commit security acl spectralink
set security acl map spectralink vlan voice in
set security acl map spectralink vlan voice out
WSS_2360#
