• May 21, 2012, 06:53:42 AM
Welcome, Guest. Please login or register. Registration is free.
Did you miss your activation email?
« previous next »
Pages: [1]

Author Topic: Motorola RFS 6000 using AP300 with Symbol PDT 6846/Symbol VRC6946  (Read 320 times)

0 Members and 1 Guest are viewing this topic.

Offline tuning_sound

  • Rookie
  • **
  • Posts: 9
Motorola RFS 6000 using AP300 with Symbol PDT 6846/Symbol VRC6946
« on: November 15, 2011, 02:09:03 PM »
Hi all,
I'm having a problem a problem in some customer that are using:
RFS6000 - FW 4.3.3
AP300
PDT 6846/VRC6946

The network configuration is WEP, because the client doesn't support more...
Every time the client connect to the RFS, i can see on the log files the follwing message:
Nov 15 01:26:50 2011: %CC-4-STATIONSSIDERR: Station 00-A0-F8-A3-F1-96 denied association to radio 5 : ssid (XXXXXXXXXXXXXXXXX) is not supported on radio
Nov 15 01:26:54 2011: %CC-4-STATIONSSIDERR: Station 00-A0-F8-A3-F1-96 denied association to radio 5 : ssid (XXXXXXXXXXXXXXXXX) is not supported on radio
Nov 15 01:26:54 2011: %CC-4-STATIONSSIDERR: Station 00-A0-F8-A3-F1-96 denied association to radio 47 : ssid (XXXXXXXXXXXXXXXXX) is not supported on radio
Nov 15 01:26:56 2011: %CC-4-STATIONSSIDERR: Station 00-A0-F8-A3-F1-96 denied association to radio 17 : ssid (XXXXXXXXXXXXXXXXX) is not supported on radio
Nov 15 01:26:56 2011: %CC-4-STATIONSSIDERR: Station 00-A0-F8-A3-F1-96 denied association to radio 47 : ssid (XXXXXXXXXXXXXXXXX) is not supported on radio
Nov 15 01:27:16 2011: %CC-4-STATIONSSIDERR: Station 00-A0-F8-B1-3F-F1 denied association to radio 35 : ssid (XXXXXXXXXXXXXXXXX) is not supported on radio
Nov 15 01:27:16 2011: %CC-4-STATIONSSIDERR: Station 00-A0-F8-B1-3F-F1 denied association to radio 35 : ssid (XXXXXXXXXXXXXXXXX) is not supported on radio
Some times the client can operates on the RFS, but when it make roaming, it never associates again, only when i reboot it...
The happens only on RFS6000/RFS7000, because this same customer also has WS5100 running FW 3.3.4 with AP300 and everything is OK.
Have it ever happen to you some of you?

Logged

Offline Michael McNamara

  • Administrator
  • Hero Member
  • *****
  • Posts: 2503
    • Michael McNamara
Re: Motorola RFS 6000 using AP300 with Symbol PDT 6846/Symbol VRC6946
« Reply #1 on: November 15, 2011, 06:48:37 PM »
I would initially guess that this is a configuration issue. Have you created a deny MAC list?

There are two references on the net to the PDT 6846 having issues with roaming;
https://docs.symbol.com/KanisaPlatform/Publishing/915/WID-00028_f.SAL_Public.html?userId=37
http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns779/C96-60914600_config_best_practices_for_motorola_st.pdf

What Mbps rates to you have enabled on the radios? Perhaps you have inadvertently disabled the 1/2Mbps rates?

With that said this is a very old device although it's a Symbol device so I would think it should probably still work on an Motorola (formerly Symbol) Wireless LAN Switch.

http://dataresourceproviders.com/PDT6800.pdf

I would look at the configuration... perhaps the PDTs are set to Spring RF protocol mode?

Good Luck!
Logged
We've been helping network engineers, system administrators and technology professionals since June 2009.
If you've found this site useful or helpful, please help me spread the word. Link to us in your blog or homepage - Thanks!

Offline tuning_sound

  • Rookie
  • **
  • Posts: 9
Re: Motorola RFS 6000 using AP300 with Symbol PDT 6846/Symbol VRC6946
« Reply #2 on: November 15, 2011, 07:05:27 PM »
The configuration is right my friend i'm pretty sure, it very basic(wep/securebeacon) nothing else.
I can get all stuff working disabling the firewal on RFS6000/7000.
Once I enable it all client 6846/VRC6946 goes down on roaming, except my Intermet CV30/MC9090/IND FTF/Voice T2x/T5/T2....
But for example if i have the firewall up, and configure all AP300 and without the Suported radio 6,9,36etc... and keep the basic 1,2,5.5,11 i works fine....

Logged
Pages: [1]
« previous next »